|
|
Sensorhardware en accessoires WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
- SAB-497AB1DS6-Q5E
- Banner Engineering
-
1:
651,88 €
-
2In voorraad
|
Mouser-onderdeelnr.
778-SAB-497AB1DS6Q5E
|
Banner Engineering
|
Sensorhardware en accessoires WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
|
|
2In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires L1 A3 FULLY ASSY MULTIBEAM
- L1A3
- Banner Engineering
-
1:
672,52 €
-
2In voorraad
|
Fabrikant- onderdeelnr.
L1A3
Mouser-onderdeelnr.
778-L1A3
|
Banner Engineering
|
Sensorhardware en accessoires L1 A3 FULLY ASSY MULTIBEAM
|
|
2In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBC1
- Banner Engineering
-
1:
367,38 €
-
4In voorraad Beperkte beschikbaarheid
|
Fabrikant- onderdeelnr.
SBC1
Mouser-onderdeelnr.
778-SBC1
|
Banner Engineering
|
Sensorhardware en accessoires MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
4In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
- BRT-THG-3-600
- Banner Engineering
-
1:
712,93 €
-
4In voorraad
|
Mouser-onderdeelnr.
778-BRT-THG-3-600
|
Banner Engineering
|
Sensorhardware en accessoires Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
|
|
4In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
Retroreflective Tapes
|
|
|
|
|
Sensorhardware en accessoires Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-900A
- Banner Engineering
-
1:
42,14 €
-
32In voorraad
|
Mouser-onderdeelnr.
778-SOP-E12-900A
|
Banner Engineering
|
Sensorhardware en accessoires Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
32In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
- LMB22LP
- Banner Engineering
-
1:
12,90 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-LMB22LP
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: Right-Angle, Low Profile; Fits M22 Base; 12 Gauge 300 Series Stainless Steel (No Hardware)
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
- SMBPVD100AB
- Banner Engineering
-
1:
39,20 €
-
4In voorraad
|
Mouser-onderdeelnr.
778-SMBPVD100AB
|
Banner Engineering
|
Sensorhardware en accessoires SMBPVD100 AB NO DIP ACCESS BKT PROTECTIVE BRACKET PVD100
|
|
4In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
- SMBR90RAMAG
- Banner Engineering
-
1:
35,26 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-SMBR90RAMAG
|
Banner Engineering
|
Sensorhardware en accessoires R90 Right-Angle Magnetic Mount; M4 x 0.7 mm; Stainless Steel
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Reflector; Q4X Clear Object Detection; Rectangular 60 x 18 mm; Max Temp = 60 degree C; Reference targets are non-traditional retro-reflective targets. They are intended to provide a consistent and reliable background surface for sensors to learn duri
- BRT-Q4X-60X18
- Banner Engineering
-
1:
19,78 €
-
5In voorraad
|
Mouser-onderdeelnr.
778-BRT-Q4X-60X18
|
Banner Engineering
|
Sensorhardware en accessoires Reflector; Q4X Clear Object Detection; Rectangular 60 x 18 mm; Max Temp = 60 degree C; Reference targets are non-traditional retro-reflective targets. They are intended to provide a consistent and reliable background surface for sensors to learn duri
|
|
5In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
Reflectors
|
|
|
|
|
Sensorhardware en accessoires Fixed Focus Fiber Lens; Accepts M4 Threaded Fibers; Beam Spot diameter 0.7 mm at 10 mm
- L4C10
- Banner Engineering
-
1:
38,70 €
-
2In voorraad
|
Fabrikant- onderdeelnr.
L4C10
Mouser-onderdeelnr.
778-L4C10
|
Banner Engineering
|
Sensorhardware en accessoires Fixed Focus Fiber Lens; Accepts M4 Threaded Fibers; Beam Spot diameter 0.7 mm at 10 mm
|
|
2In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires SMB46LQMT 25MM SCREWS QMT42 MOUNTING
- SMB46LQMT
- Banner Engineering
-
1:
28,38 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-SMB46LQMT
|
Banner Engineering
|
Sensorhardware en accessoires SMB46LQMT 25MM SCREWS QMT42 MOUNTING
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket: Straight or Flat Bracket with; AMS Mounting; Including Side Impact and Glass Window
- SMBAMSQ5XIPP
- Banner Engineering
-
1:
83,42 €
-
7In voorraad
|
Mouser-onderdeelnr.
778-SMBAMSQ5XIPP
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: Straight or Flat Bracket with; AMS Mounting; Including Side Impact and Glass Window
|
|
7In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
Brackets
|
|
|
|
|
Sensorhardware en accessoires Bracket: Right-angle bracket; 300 Stainless Steel; Fine-adjust accessory available (model SMBLT7F); Used with LT7
- SMBLT7
- Banner Engineering
-
1:
43,00 €
-
9In voorraad
|
Fabrikant- onderdeelnr.
SMBLT7
Mouser-onderdeelnr.
778-SMBLT7
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: Right-angle bracket; 300 Stainless Steel; Fine-adjust accessory available (model SMBLT7F); Used with LT7
|
|
9In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires SMBQ60IP BRACKET ASSEMBLY INDUSTRIAL PROTECTION Q60
- SMBQ60IP
- Banner Engineering
-
1:
58,44 €
-
2In voorraad
|
Mouser-onderdeelnr.
778-SMBQ60IP
|
Banner Engineering
|
Sensorhardware en accessoires SMBQ60IP BRACKET ASSEMBLY INDUSTRIAL PROTECTION Q60
|
|
2In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket: for DX80 or Q45 to K50U-RA
- BWA-BK-004
- Banner Engineering
-
1:
36,12 €
-
9In voorraad
|
Mouser-onderdeelnr.
778-BWA-BK-004
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: for DX80 or Q45 to K50U-RA
|
|
9In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Accessory: EG24 Reflector Arm with Reflector
- ACC-EG24-REFLECTOR ARM
- Banner Engineering
-
1:
22,36 €
-
1In voorraad
-
Nieuw bij Mouser
|
Mouser-onderdeelnr.
778-EG24REFLECTORARM
Nieuw bij Mouser
|
Banner Engineering
|
Sensorhardware en accessoires Accessory: EG24 Reflector Arm with Reflector
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
Reflectors
|
EG24 Series
|
|
|
|
Sensorhardware en accessoires Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
- LMBHLS27S
- Banner Engineering
-
1:
17,20 €
-
2In voorraad
|
Mouser-onderdeelnr.
778-LMBHLS27S
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
|
|
2In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
- MSA-S42-1
- Banner Engineering
-
1:
635,83 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-MSA-S42-1
|
Banner Engineering
|
Sensorhardware en accessoires Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
Hardware
|
optical Safety System Sensors or Corner Mirrors
|
|
|
|
Sensorhardware en accessoires OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
- OTC-1-GN
- Banner Engineering
-
1:
18,92 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-OTC-1-GN
|
Banner Engineering
|
Sensorhardware en accessoires OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
- RPBR2
- Banner Engineering
-
1:
164,26 €
-
3In voorraad Beperkte beschikbaarheid
|
Fabrikant- onderdeelnr.
RPBR2
Mouser-onderdeelnr.
778-RPBR2
|
Banner Engineering
|
Sensorhardware en accessoires MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc-12-250 V ac; Output: SPDT Electromechanical Relay; Wiring Chamber
|
|
3In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBEV
- Banner Engineering
-
1:
244,27 €
-
5In voorraad Beperkte beschikbaarheid
|
Fabrikant- onderdeelnr.
SBEV
Mouser-onderdeelnr.
778-SBEV
|
Banner Engineering
|
Sensorhardware en accessoires MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
5In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
- SMBPVA7
- Banner Engineering
-
1:
43,00 €
-
5In voorraad
|
Mouser-onderdeelnr.
778-SMBPVA7
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
|
|
5In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
- SMBSAB-IN
- Banner Engineering
-
1:
12,04 €
-
5In voorraad
|
Mouser-onderdeelnr.
778-SMBSAB-IN
|
Banner Engineering
|
Sensorhardware en accessoires Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
|
|
5In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket: with Flush Mount Frame; One Axis +/- 20 Degree Adjustment; 12 Gauge Stainless Steel; Used with Q240
- SMBQ240SS1
- Banner Engineering
-
1:
211,90 €
-
3In voorraad
|
Mouser-onderdeelnr.
778-SMBQ240SS1
|
Banner Engineering
|
Sensorhardware en accessoires Bracket: with Flush Mount Frame; One Axis +/- 20 Degree Adjustment; 12 Gauge Stainless Steel; Used with Q240
|
|
3In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
|
|
Sensorhardware en accessoires Bracket for Mounting R90; R90 Right-Angle; M4 x 0.7 mm; Stainless Steel
- SMBR90RA
- Banner Engineering
-
1:
18,92 €
-
1In voorraad
|
Mouser-onderdeelnr.
778-SMBR90RA
|
Banner Engineering
|
Sensorhardware en accessoires Bracket for Mounting R90; R90 Right-Angle; M4 x 0.7 mm; Stainless Steel
|
|
1In voorraad
|
|
Min.: 1
Veelv.: 1
|
|
|
|
|
|
