A301 FlexiForce™ Piezoresistive Force Sensors

Tekscan A301 FlexiForce™ Piezoresistive Force Sensors are available off-the-shelf and are ideal for an easy proof of concept. The A301 sensors offer optimization for high-volume manufacturing and are suitable for embedding into products and applications. These components feature Enhanced Stability Series (ESS) pressure-sensitive ink for high-temperature and high-humidity environments. The Tekscan A301 FlexiForce™ Piezoresistive Force Sensors measure up to 4,448N (1,000lbs.). To measure higher forces, apply a lower drive voltage (-0.5V, -0.25V, etc.) and reduce the resistance of the feedback resistor (1kΩ minimum). For lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.

Resultaten: 3
Selecteren Afbeelding Onderdeelnummer
 Fabrikant
Omschrijving Gegevensblad Beschikbaarheid Prijsbepaling (EUR) De resultaten in de tabel met eenheidsprijs filteren op basis van uw hoeveelheid.
Hvh. RoHS ECAD-model Sensortype
Stuurkracht
Nauwkeurigheid
Uitgangstype
Montagetype
Tekscan Krachtsensoren en laadcellen 100 lb force specification; sensing area diameter of 0.375 in; standard length of 1 in.
Gegevensblad
884In voorraad
Min.: 1
Veelv.: 1

Force Sensor 445 N 3 % Voltage Solder Tab (Pin)
Tekscan Krachtsensoren en laadcellen 25 lb force specification; sensing area diameter of 0.375 in; standard length of 1 in.
Gegevensblad
394In voorraad
Min.: 1
Veelv.: 1

Force Sensor 111 N 3 % Voltage Solder Tab (Pin)
Tekscan Krachtsensoren en laadcellen 1 lb force specification; sensing area diameter of 0.375 in; standard length of 1 in.
Gegevensblad
200In voorraad
400Verwacht 9/10/2026
Min.: 1
Veelv.: 1

Force Sensor 4.4 N 3 % Voltage Solder Tab (Pin)