USB to MPSSE Cables

FTDI USB to MPSSE Cables provides a fast, simple way to connect devices with 3.3V logic level interfaces to USB. The Digital Level Multi-Protocol Synchronous Serial Engine (MPSSE) cables are available with both 3.3V and 5V output. The connector end of each of the cables contains FTDI's FT232H USB interface chip. The cables are terminated by ten individual wires, which can be interfaced with a 0.1" pitch male header. Supporting the USB 2.0 Hi-Speed (480Mb/s) standard, the USB to MPSSE Cables from FTDI can be used to communicate with various synchronous serial interfaces, such as JTAG, SPI, or I2C. The MPSSE enables designers to implement proprietary synchronous serial bus protocols.

Resultaten: 2
Selecteren Afbeelding Onderdeelnummer
 Fabrikant
Omschrijving Gegevensblad Beschikbaarheid Prijsbepaling (EUR) De resultaten in de tabel met eenheidsprijs filteren op basis van uw hoeveelheid.
Hvh. RoHS Product
Type
Connectoruiteinde A
Connectoruiteinde A telling pennen
Connectoruiteinde B
Connectoruiteinde B telling pennen
Geslacht
Kabelmeter - AWG
Kabellengte
Kabelmantelkleur
Verpakken
Reeks
Nominale spanning
FTDI USB-kabels/IEEE 1394-kabels USB TO HS SPI/I2C/ JTAG Conv 3.3V, 0.5m
Gegevensblad
231In voorraad
1.600Besteld
Min.: 1
Veelv.: 1

USB Cable Assemblies USB 2.0 USB 4 Position Pin 10 Position Male / Female 24 AWG 500 mm Black Bulk C232 3.3 V
FTDI USB-kabels/IEEE 1394-kabels USB TO HS SPI/I2C/ JTAG Conv 5V 0.5M
Gegevensblad
3.558Besteld
Min.: 1
Veelv.: 1

USB Cable Assemblies USB 2.0 USB 4 Position Pin 10 Position Male / Female 24 AWG 500 mm Black Bulk C232 5 VDC